STYLECAPS

Sizes | Colors | Installation

Colors

We stock white and will special order any other colors.

Installation Guide

Set the StyleCap with white ceramic tile adhesive (thinset) mixed to a dry consistency.

1. Apply a full bed of thinset onto the glass blocks where the StyleCap will be set. Shape the thinset to a 12mm high peak (about 1/2").
2. Set the StyleCap onto the thinset. Apply even pressure with a slight back and forth motion to remove any trapped air.
3. Scrape off excess thinset with a piece of cardboard and damp sponge any residue.
4. Align StyleCap using a straight edge. Allow the thinset to dry for 12 hours.
5. Using a rubber float, grout the joints with unsanded white tile grout mixed with water.
6. Sponge out any excess at once. when dry, the slight film of grout that is left behind may be removed wtih a clean dry cloth.